I don't know if this is necessary. The following are the steps to fix this issue after the Windows 10 1803 update. These were either marked as solved by users or have been proposed as fixes on branded websites. Double-click on it to open its Properties box. So if you install the latest Graphics driver like version 10. You should try updating or reinstalling your graphics driver and see if this helps you resolve your problem. I have gone through hundreds of posts and gathered together the ones with solutions that worked for at least one person.
Just make that the default device. If nothing works, i give up. Most people should not need to do this. After upgrading to a newer version A11 , there is no sound. I've tested the receiver, multiple cables, the converter - everything- but no dice it must be my computer, eh? Once installed and rebooted as is normal with graphics drivers, it was plug in the cable and go. Try to change the bios to an older version.
Below are 3 solutions for you to make it. To update, you can download latest drivers from the official website or update it manually from the manufacturer website. All the drivers were installed, and the correct options were selected in the audio panel. Use to see if the problem resolves. Please reboot your computer You may also refer to: Hope it helps. So check whether its the same on the other end also. Windows searches for the necessary drivers online and installs them on your computer.
I am using Windows 7 on Dell E6410, and it works for me. Before you begin, just ensure that you have plugged in all the cables properly and that you have not muted the speakers by mistake. Driver Easy will then scan your computer and detect any problem drivers. Select the trouble audio devices. Try going to Device manager and see if you find anything sound related. This problem did not exist in 8.
That should do the trick. This will fix the problems. See whether the driver is installed and the device working properly. Since upgrading to windows 10 audio through hdmi is not functioning. Pretty incredible, but just stopping the Hyper-V service worked for me.
My only choice was to roll back to Windows 8. Fortunately, just temporary disabling it seems to do the trick as well. I went to control panel, then sounds. This makes the device as the default option for audio in Windows 10. So when you will connect your hdmi cable, the audio will work automatically! Sometimes the option does not appear in the Playback tab because of disabled devices. But in the playback devices, the default audio device is still set to your computer speakers etc. I already updated driver through generic Microsoft and that of course didnt work.
Configure you display settings again to what you had before 5. Method 2: I already said that I updated all my drivers sound, video cards -anything that would relate to this issue. However I have no sound at all. Though this has nothing to do with audio problems, but this could have impact on sound properties also. Video worked fine, and the 'sound bars' on the playback devices list would flash when I was trying to play some audio.
Please advise on how to rectify the matter or haw to downgrade back to 8. As explained earlier the reasons can many, but some solutions are given in them. Then you can try this fix. You just have to follow the sequence of switching on your devices in a particular order. This can be done using the vendor website with the system tag. This should bring the quo-status to the original. The case can be when laptop is connected to multiple monitors.
Plus the cables are extremely inexpensive. I really struggled with an H87 chipset only showing Realtek audio. You should be able to play any movie file or dvd now with true 5. I've read the whole conversation and tried everything. I also had the same problem as you and Cara. The solution is simple but may take lot of time troubleshooting. Otherwise, just enable that option in Device Manager and you can see your Display Device under disabled and hidden options.
This is the case, if you have many sound cards or speakers attached. The Catalyst Control Centre may not work for 10. You might have tried earlier solutions like updating audio driver etc, but still in vain. If a sound card is listed, you have one installed. Earlier before my sound stopped working I was using the realtek digital output. It will download and install all the required drivers from official sites.