With vehicle off, press and release the brake pedal. Here is the link to the sight with instructions for the reset the 2006-2007 explorer data is at the bottom. They all say that they have metal stems in posts on this forum, but mine and all 2007's I have seen has rubber stems. Turn the ignition key to the second position so that the dash lights are illuminated. Driving on a significantly under-inflated tire causes the tire to overheat and can lead to tire failure.
Do not start the engine. Locating the Tire Pressure Sensor Each road tire is equipped with a tire pressure sensor, which is located inside the wheel and tire assembly cavity. Power off by pushing the button 1 time. When changing any of your tires, take care to avoid damaging the sensor. Return the key to the off position. While I was mounting and ballancing I noticed that one of the rims had the strap but was missing the sensor. If the horn sounds, the training procedure must be repeated.
This process could take 1-1 O miles of continuous driving. Return the key to the off position. I would just cut your losses and ignore the light like I do. With vehicle off, press and release the brake pedal. Call toll free to order or place your order online via our secure checkout system.
So, just to clarify, do you put new tires on your stock wheels? A high speed blow out could be deadly. The car horn should sound once meaning that your car is compatible with our device! Since the sensor is attached to the valve stem, it is covered by the tire and not visible unless the tire is removed. I think it's a fairly useful feature. Have you checked the air in all the tires and made sure they are all at factory door specs? Power off by pushing the button 1 time. Operation is subject to the following two conditions: 1 This device may not cause harmful interference, and 2 This device must accept any interference received, including interference that may cause undesired operation. I see no difference here.
Do not start the engine. Failure to properly maintain tire pressure can increase the risk of tire failure, loss of control, vehicle rollover and personal injury. Our online parts catalog uses real-time inventory, so you can be assured the parts you buy are in stock at the time of ordering. After the tire techs kept breaking the sensors, I got another set of rims and sensors. The tool I posted about wasn't listed for the Explorer either. Does the spare have a sensor in it? The missing sensor is on the passenger rear position.
And no they are not very difficult to find. It's well worth it, especially on a lifted vehicle with big mud tires. A tire gauge should be a standard component within your set of emergency items in your vehicle. When the malfunction indicator is active, the system may not be able to detect or signal low tire pressure. Place foot on the brake for 2 seconds and remove.
It looks like a garage door opener with a little green button in the middle. Power off by pushing the button 1 time. And when you say the light goes off then back on do you mean it flashes? Horn will sound once sensor has been recognized. Ford Motor Company is an American automobile manufacturer that distributes its vehicles worldwide. Help me out guys and gals.
Repair the damaged road wheel and tire assembly and reinstall it on the vehicle to restore normal system function. After the tire techs kept breaking the sensors, I got another set of rims and sensors. This process could take 1-10 miles of continuous driving. Do not start the engine. Press and release the brake pedal. Ensure all tires are inflated to the pressure listed on the tire placard.